Preventive Maintenance

Preventive Maintenance (PPM): How Saudi Facilities Plan Upkeep to Cut Downtime

In a Saudi summer, a chiller that fails at 2 p.m. is not a repair job; it is an evacuated floor, a stopped production line or a closed operating theater. Preventive maintenance exists to catch that failure while it is still a line on a work order. This blog explains what preventive maintenance (PPM) is, how it differs from corrective and predictive maintenance, and how to build a schedule, checklist and KPIs that work in Saudi operating conditions.

What is preventive maintenance?

Preventive maintenance (PM) is scheduled inspection, servicing and part replacement carried out before equipment fails. Its purpose is simple: replace emergency repairs with planned, predictable work. Typical tasks include lubricating moving parts, tightening connections, inspecting electrical systems and replacing worn belts or bearings. In a building, that means cleaning HVAC coils, load-testing standby generators, checking fire pumps and servicing water pumps and lifts on a fixed plan.

Why is preventive maintenance important for critical facilities?

For hospitals, data centers, plants and airports, a failure is expensive and sometimes dangerous. The evidence is strong: in a NIST survey of manufacturers, the half that relied more on preventive and predictive maintenance reported 52.7% less unplanned downtime and 78.5% fewer defects than the rest.

Saudi conditions raise the stakes. Sustained heat and airborne dust work HVAC units, generators and electrical equipment harder, so check whether your manufacturers specify shorter intervals for severe operating conditions. Some preventive maintenance is also a legal duty: Chapter 9 of the Saudi Fire Code (SBC 801) covers inspection and testing requirements for fire protection systems such as sprinklers, standpipes and fire alarms.

What is PPM in maintenance?

PPM stands for planned preventive maintenance: preventive tasks written into a plan, with an owner, an interval and a checklist for each asset. If you search for “PPM full form”, you will mostly find “parts per million”, which is a different term. PPM tasks are triggered in three ways:

  • Time-based: a fixed calendar interval, such as monthly or quarterly servicing.
  • Usage-based: after a set number of running hours, cycles or kilometers, such as generator service hours.
  • Condition-based: when an inspection or reading shows wear, such as rising vibration or falling airflow.

Most facilities combine all three, choosing the trigger that best fits each asset.

How is corrective maintenance different from preventive maintenance?

Corrective maintenance restores an asset after a fault is found or after it fails, and reactive (run-to-failure) maintenance is its unplanned end. Preventive maintenance is scheduled in advance, at a time that suits operations. Running to failure still makes sense for cheap, non-critical items such as a blown light fitting. As a rule of thumb, TWI notes that experts aim for about 80% preventive and 20% corrective work. ZOMCO’s Reactive & Corrective Maintenance service covers the work that planning cannot prevent.

Preventive vs predictive maintenance: which suits your assets?

Preventive maintenance follows a schedule, so some parts are replaced while still in good condition. Predictive maintenance uses condition data from sensors and analytics to act only when readings point to a developing fault. It avoids unnecessary work but costs more to set up: sensors, data platforms and people who can interpret them.

Our recommendation: use predictive maintenance on a short list of critical, high-value rotating assets such as chillers, large pumps and compressors, and run planned preventive maintenance on everything else.

How do you build a preventive maintenance schedule and checklist?

Five steps turn good intentions into a working preventive maintenance plan:

  1. List your assets with location, make, model, age and maintenance history.
  2. Rank them by criticality: what happens to safety, operations and cost if each one fails?
  3. Set tasks and intervals from manufacturers’ guidance, applicable codes and your own failure history, then tighten them where conditions are harsh.
  4. Schedule in a CMMS so work orders, records and reports run automatically. In a 2026 PwC and Saudi Facility Management Association survey, 37% of respondents use or plan to adopt a CAFM or CMMS, while one in five still rely only on spreadsheets or paper logs.
  5. Review results quarterly and adjust intervals and tasks.

A starting checklist for a Saudi facility:

AssetWhat to checkHow to set the interval
HVAC and chillersFilters, coils, refrigerant, belts, controlsManufacturer guidance, adjusted for heat and dust
Standby generatorsFuel, batteries, coolant, load testManufacturer guidance and running hours
Fire protection systemsPumps, sprinklers, alarms, extinguishersSaudi Fire Code (SBC 801) and the standards it references
Electrical distributionThermal scans, connections, breakersAsset criticality and condition readings
Pumps and water systemsVibration, seals, leaks, tank hygieneRunning hours and condition

Track three KPIs to know whether the plan works:

  • PM compliance: the share of scheduled tasks completed on time.
  • Planned maintenance percentage: planned hours as a share of all maintenance hours.
  • MTBF (mean time between failures): this should rise as the plan matures.

How does ZOMCO deliver preventive maintenance for Saudi facilities?

ZOMCO, a Zamil Group company founded in Al-Khobar in 1977, delivers Preventive & Planned Maintenance as part of ZOMCO IFM, its integrated facilities management line. Its programs prioritize inspections and servicing by asset criticality and are aligned with national regulations, manufacturer guidelines and organizational standards. Related services include HVAC & Mechanical Services and Asset & Lifecycle Management, delivered in urban and remote locations across the Kingdom.

To build or review a PPM plan for your sites, start with your asset list and criticality ranking, then contact ZOMCO.


FAQs

What is the 10% rule of preventive maintenance?

The 10% rule is a scheduling tolerance: each preventive maintenance task should be performed within 10% of its scheduled interval. For a 30-day task, that means completing it within three days of the due date. Tasks outside that window count against PM compliance and suggest the schedule or staffing needs attention.

What are examples of preventive maintenance?

Common examples include replacing HVAC filters, cleaning condenser coils, lubricating motors and bearings, load-testing standby generators, testing fire alarms and fire pumps, thermal-scanning electrical panels and checking pumps for vibration and leaks. Each task is scheduled in advance rather than triggered by a breakdown.

How often should preventive maintenance be done?

There is no single interval. Start from the manufacturer’s recommendation and any code requirement, then adjust for how critical the asset is, how hard it works and its failure history. Critical assets in harsh conditions usually need shorter intervals than the same equipment in a mild, clean environment.


Meta title: 

Preventive Maintenance (PPM) Guide for Saudi Facilities 

Meta description: 

What preventive maintenance (PPM) is, how it compares with corrective and predictive maintenance, plus a schedule, checklist and KPIs for Saudi facilities.

Meta Tags:

preventive maintenance, PPM maintenance, planned preventive maintenance, corrective maintenance, reactive maintenance, preventive vs predictive maintenance, preventive maintenance schedule, preventive maintenance checklist, maintenance KPIs, Saudi facilities 


Sources

  1. Thomas, D. and Weiss, B. (NIST). “Maintenance Costs and Advanced Maintenance Techniques in Manufacturing Machinery: Survey and Analysis.” International Journal of Prognostics and Health Management, 12(1). 25 April 2021. nist.gov
  2. International Code Council. “Saudi Building Code 801 and 201: Fire Protection Systems” (2018 SBC 801, Chapter 9). iccsafe.org
  3. TWI. “What is Corrective Maintenance?” 2021. twi-global.com
  4. ServiceChannel. “The Key to a Successful Preventive Maintenance Plan.” 21 January 2023. servicechannel.com
  5. PwC Middle East and Saudi Facility Management Association. “The evolving facility management landscape in Saudi Arabia.” 2026. pwc.com
Scroll to Top